Floors

Choosing the Right Floor Solution

Don’t Replace – Renew with N-Hance.

Over time your floors may appear to be in such bad condition that they need to be completely replaced or sanded down. They may have separated or suffered color loss due to traffic wear patterns or sun fading. N-Hance can repair or disguise much of the damaged areas and restore that original life and luster to your floors.

N-Hance Floor Renewal Options.

Basic Floor Renewal

Basic Floor Renewal

The ideal Basic Floor Renewal job is a floor that has some visible wear with light surface scratches. The finish is pretty much intact with no signs of bare wood. Separations between the boards are minimal and the entire floor requires minor touch-up, if any. A Basic Floor Renewal is typically completed in just one day.

Hammered Floor Renewal

Hammered Floor Renewal

The Hammered Floor Renewal is for a little rougher floor with grey to black traffic areas that have been worn down to the bare wood. The finish may be intact along the perimeter of the room, but the center of the floor is completely worn. Deep impressions and cross grain scratches are visible due to large dogs, children or moving furniture around such as a piano or refrigerator. Water damage may be present on this type of floor and separations between the boards run throughout the entire wood surface. With this type of floor the technician needs to screen and fill the floor and it may take 1-2 days to finish the job.

Non-Sandable Floor Renewal

Non-Sandable Floor Renewal

There are many floors that cannot be sanded such as cork, bamboo, some engineered floors and the increasingly popular hand-scraped or distressed floors. Even with solid wood floors that can be sanded, you can only do it one or two times before you’re down to the tongue and groove. Because the N-Hance process doesn’t generally go down to the grain level, we can refinish all of these types of floors. N-Hance is your only solution for these types of popular floors.

Back to Top